| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Engine/Hybrid System | Section: Engine Mechanical | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002S5G00HX |
| Title: 3UR-FE ENGINE MECHANICAL: CYLINDER BLOCK: REPLACEMENT (2008 Sequoia) | ||
REPLACEMENT
1. REPLACE STRAIGHT PIN
NOTICE:
It is not necessary to remove the straight pin unless it is being replaced.
(a) Remove the straight pins.
(b) Using a plastic-faced hammer, tap in new straight pins to the cylinder block.
Standard Protrusion:
|
Item |
Pin Diameter |
Specified Condition |
|---|---|---|
|
Pin A |
10 mm (0.394 in.) |
23 mm (0.906 in.) |
|
Pin B |
10 mm (0.394 in.) |
11 mm (0.433 in.) |
|
Pin C |
8 mm (0.315 in.) |
9 mm (0.354 in.) |
|
Pin D |
4 mm (0.157 in.) |
6 mm (0.236 in.) |
|
|